Olaplex Absolute Services

Repairing treatment

Benefits
Strengthens very damaged hair
Rebuilds the internal structure of the hair for future chemical services
Repairs hair deep down
Acts like a "re-set button" for sensitized hair

Times
Application: 20 minutes
Processing time: 30 minutes

Ingredients 
15 ml of OLAPLEX Bond Multiplier No. 1 
15 ml of OLAPLEX Bond Perfector No. 2 
Essentiel KERATIN Shampoo and Tailor-Made Hair Repair Treatment
90 ml of warm water

Recipe
1. Dampen hair 
2. Dilute 15 ml of OLAPLEX Bond Multiplier No. 1 with 90 ml of warm water and apply exclusively with an applicator bottle.
3. Leave in for 10 minutes (do not rinse)
4. Apply 15 ml of OLAPLEX Bond Perfector No. 2 and rub into hair section by section.
Working with long, thick hair? You can increase the amount of OLAPLEX Bond Perfector No. 2 if necessary.
5. Leave in for 10 minutes
6. Rinse and towel-dry hair
7. To finish, follow the ESSENTIEL Keratin protocol: shampoo hair, then apply Tailor-Made Hair Repair Treatment. 

Foil highlights

Times
Application: 30-45 minutes
Processing time: 20 min-1 hour

Ingredients
SOLARIS Poudr7 
OXYCREM
OLAPLEX Bond Multiplier No. 1 (adjust based on quantity of powder used)
OLAPLEX Bond Perfector No. 2
SOLARIS Neutralizing Milk 

Recipe
1. Prepare the Poudr7 mix with Oxycrem (note: do not increase volume of developer for foil techniques)
2. Add OLAPLEX Bond Multiplier No. 1 and mix:
less than 30 g of Poudr7 = 3.75 ml of OLAPLEX Bond Multiplier No. 1 (one dose)
30-60 g of Poudr7 = 7.5 ml of OLAPLEX Bond Multiplier No. 1 (2 doses)
more than 60 g of Poudr7 = prepare two separate mixes 
3. Leave in, then rinse
4. Apply 15 ml of Bond Perfector No. 2 and rub into hair section by section
Working with long, thick hair? You can increase the amount of OLAPLEX Bond Perfector No. 2 if necessary.
5. Leave in for 10 minutes, then rinse
6. Use SOLARIS Neutralizing Milk, then rinse. If necessary, use a conditioning treatment. 

Open air highlights or all-over bleaching

Times
Application: 30-45 minutes
Processing time: 20 min-1 hour

Ingredients
SOLARIS Poudr6 
OXYCREM
OLAPLEX Bond Multiplier No. 1 (adjust based on quantity of powder used)
15 ml of OLAPLEX Bond Perfector No. 2
SOLARIS Neutralizing Milk 

Recipe
1. Mix Poudr6 or Poudr7 with OXYCREM
Increase strength of OXYCREM if necessary, but do not extend processing time. Do not use 40 vol. for all-over applications
2. Add Bond Multiplier No. 1 and mix: 
less than 30 g of powder = 1.875 ml of OLAPLEX Bond Multiplier No. 1 (=1/2 dose)
30-60 g of powder = 3.75 ml of OLAPLEX Bond Multiplier No. 1 (2 doses)
more than 60 g of powder = prepare two separate mixes of 60 g maximum
3. Leave in, then rinse
4. Apply 15 ml of OLAPLEX Bond Perfector No. 2 and rub into hair section by section
Working with long, thick hair? You can increase the amount of OLAPLEX Bond Perfector No. 2 if necessary.
5. Leave in for 10 minutes, then rinse
6. Use SOLARIS Neutralizing Milk, then rinse. If necessary, use a conditioning treatment. 

Applying color to lengths

Times
Application: 20 minutes
Processing time: 40-45 min

Ingredients
CARMEN or YZAE
OXYCREM or YZAE Developer 
OLAPLEX Bond Multiplier No. 1 (adjust based on quantity of powder used)
15 ml of OLAPLEX Bond Perfector No. 2
EQUIVITAL or YZAE Post-Color  Shampoo

Recipe
1. Prepare colorant mix with OXYCREM or YZAE Developer
2. Add Bond Multiplier No. 1 and mix: 
less than 30 g of CARMEN or YZAE colorant = 1.875 ml of OLAPLEX Bond Multiplier No. 1 (1/2 dose)
30-60 g of CARMEN or YZAE colorant = 3.75 ml of OLAPLEX Bond Multiplier No. 1 (2 doses)
more than 60 g of CARMEN or YZAE colorant = prepare two separate mixes
4. Apply 15 ml of OLAPLEX Bond Perfector No. 2 and rub into hair section by section
Working with long, thick hair? You can increase the amount of OLAPLEX Bond Perfector No. 2 if necessary.
5. Leave in for 10 minutes, then rinse
6. Shampoo hair with OXYCREM or YZAE Post-Color  Shampoo, then rinse. If necessary, use a conditioning treatment. 

Brazilian straightening treatment​

Times
Application: 2 hours
Processing time: 25 minutes

Ingredients
15 ml of Bond Multiplier No. 1
90 ml of warm water
EQUIVITAL Pre-Perm Shampoo
CURLESS KERATINE
15 ml of Bond Perfector No. 2

Recipe
1. Dilute 15 ml of Bond Multiplier No. 1 with 90 ml warm water
2. To damp, towel-dried hair, apply Bond Multiplier No. 1 evenly all over hair using a bottle applicator exclusively.
3. Leave in for 5 minutes and do not rinse
4. Apply 15 ml of Bond Perfector No. 2 and rub into hair section by section
Working with long, thick hair? You can increase the amount of OLAPLEX Bond Perfector No. 2 if necessary.
5. Leave in for 10-20 minutes based on the hair's degree of damage, then rinse
6. Shampoo hair with EQUIVITAL Pre-Perm Shampoo, then start application of CURLESS KERATINE following the protocol. 

Permanente

Réalisation
Application : 30 min  
Temps de pause : 30 à 40 min

Ingrédients
Shampoing Pré-forme EQUIVITAL
ATTENTIVE
Fixateur Douceur & Tenue 
30 ml de Bond Multiplier N°1 OLAPLEX
90 ml d’eau tiède 
EQUIVITAL Post Coloration (shampoing pH acide)
NB : peut être utilisé avec les permanentes TONIFORM et VOLUBILIS

Recette
1. Appliquer votre permanente ATTENTIVE selon le protocole habituel.  
2. Rincer le réducteur puis appliquer le fixateur à permanente sur les rouleaux. 
• sur cheveux très abîmés : rincer le fixateur après un temps de pause de 5 min, appliquer le Bond Multiplier N°1 pur sur les rouleaux, laisser pauser 7 min 30 puis refaire un deuxième passage avec à nouveau 7 min 30 de temps de pause, puis rincer.
• sur cheveux abîmés, méchés : 30 ml de Bond Multiplier N°1 pour 90 ml d’eau tiède, appliquer immédiatement par-dessus le fixateur, laisser pauser 7 min 30, faire un deuxième passage avec le Bond Multiplier N°1 OLAPLEX selon la même dilution, laisser pauser à nouveau 7 min 30, puis rincer.
• sur cheveux colorés ou normaux : diluer 30 ml de Bond Multiplier N°1 OLAPLEX pour 90 ml d’eau tiède, appliquer immédiatement par-dessus le fixateur, laisser pauser 15 min, puis rincer. 

Pas d’application de Bond Perfector N °2 OLAPLEX qui alourdirait la permanente. 

3. Faire un shampooing au pH acide EQUIVITAL Post Coloration, rincer, sécher les cheveux. 

Times

Application: Approximately 30 minutes-1 hour
Processing time: 2 x 50 min

Ingredients
SOLARIS Poudr7 
OXYCREM
OLAPLEX Bond Multiplier No. 1 
Adjust based on quantity of Poudr7 used
2x15 ml of OLAPLEX Bond Perfector No. 2 
SOLARIS Neutralizing Milk

Recipe

STEP 1: FIRST LIGHTENING

1. Prepare the SOLARIS Poudr7 mix with OXYCREM. 
2. Add Bond Multiplier No. 1 and mix: 
• less than 30 g of Poudr7 = 1.875 ml of OLAPLEX Bond Multiplier No. 1 (=1/2 dose)
• 30-60 g of Poudr7 = 3.75 ml of OLAPLEX Bond Multiplier No. 1 (=1 dose)
• more than 60 g of Poudr7 = prepare two separate mixes
3. Leave in for up to 50 minutes then rinse.  
4. Apply 15 ml of Bond Perfector No. 2 and rub into hair section by section. 
Working with long, thick hair? You can increase the amount of No. 2 if necessary. 
5. Leave in for 10 minutes, then rinse. 

STEP 2: SECOND LIGHTENING

1. If you need additional lifting, repeat the bleaching process with Poudr7 following the same directions and doses for Bond Multiplier No. 1. 
2. Apply the mix following the appropriate protocol. 
3. Observe processing time for bleaching, then rinse.  
4. Apply 15 ml of OLAPLEX Bond Perfector No. 2 and rub into hair section by section.  
Working with long, thick hair? You can increase the amount of Bond Perfector No. 2 if necessary. 
5. Leave in for 10 minutes, then rinse. 
6. Use SOLARIS Neutralizing Milk, then rinse. If necessary, use a conditioning treatment.

Note: To tone the hair, prepare the glaze following the recommended dose for less than 30 g of colorant.

Times
Application: 30-45 minutes
Processing time: variable

Ingredients
SOLARIS Demaq 
OXYCREM or water
CARMEN or YZAE
OLAPLEX Bond Multiplier No. 1 
Adjust based on quantity of product used 
2x15 ml OLAPLEX Bond Perfector No. 2 
SOLARIS Neutralizing Milk
EQUIVITAL Post-Color  Shampoo

Recipe

STEP 1: HAIR COLOR REMOVAL

1. Prepare the SOLARIS hair color remover mix with water or OXYCREM according to your usual method.
2. Add Bond Multiplier No. 1 and mix: 
• for 1 packet (25 g) = 3.75 ml of Bond Multiplier No. 1 (=1 dose) 
• for 2 sachets (2x25 g) = 7.5 ml of Bond Multiplier No. 1 (= 2 doses)
3. Proceed with hair color removal using the appropriate protocol until you achieve your desired base, then rinse.
4. Apply 15 ml of Bond Perfector No. 2 and rub into hair section by section thoroughly so as to distribute the product throughout the hair. (Use a dose of 15 ml for medium length hair).
5. Leave in for 10 minutes, then rinse.
6. Use SOLARIS Neutralizing Milk, then rinse. 
7. Dry hair.

STEP 2: HAIR COLORING

1. Working with the bleached sections of hair, prepare the CARMEN/YZAÉ colorant mix with OXYCREM or a suitable developer. 
2. Add Bond Multiplier No. 1 and mix: 
• less than 30 g of colorant = 1.875 ml of OLAPLEX Bond Multiplier No. 1 (= 1/2 dose)
• 30-60 g of colorant = 3.75 ml of OLAPLEX Bond Multiplier No. 1 (= 1 dose)
• more than 60 g of colorant = prepare two separate mixes
3. Color the lightened sections. Leave in according to your technical expertise (30 minutes maximum). Rinse.   
4. Apply 15 ml of OLAPLEX Bond Perfector No. 2 and rub into hair section by section. 
5. Leave in for 10 minutes, then rinse. 
6. Shampoo hair with EQUIVITAL or YZAE Post-Color  Shampoo, then apply usual conditioner. 

Times
Application: 30-45 minutes
Processing time: variable

Ingredients
SOLARIS Demaq 
OXYCREM or water
CARMEN or YZAE
OLAPLEX Bond Multiplier No. 1 
Adjust based on quantity of product used 
2x15 ml OLAPLEX Bond Perfector No. 2 
SOLARIS Neutralizing Milk
EQUIVITAL Post-Color  Shampoo

Recipe

STEP 1: HAIR COLOR REMOVAL

1. Prepare the SOLARIS hair color remover mix with water or OXYCREM according to your usual method.
2. Add Bond Multiplier No. 1 and mix: 
• for 1 packet (25 g) = 3.75 ml of Bond Multiplier No. 1 (=1 dose) 
• for 2 sachets (2x25 g) = 7.5 ml of Bond Multiplier No. 1 (= 2 doses)
3. Proceed with hair color removal using the appropriate protocol until you achieve your desired base, then rinse.
4. Apply 15 ml of Bond Perfector No. 2 and rub into hair section by section thoroughly so as to distribute the product throughout the hair. (Use a dose of 15 ml for medium length hair).
5. Leave in for 10 minutes, then rinse.
6. Use SOLARIS Neutralizing Milk, then rinse. 
7. Dry hair.

STEP 2: HAIR COLORING

1. Working with the bleached sections of hair, prepare the CARMEN/YZAÉ colorant mix with OXYCREM or a suitable developer. 
2. Add Bond Multiplier No. 1 and mix: 
• less than 30 g of colorant = 1.875 ml of OLAPLEX Bond Multiplier No. 1 (= 1/2 dose)
• 30-60 g of colorant = 3.75 ml of OLAPLEX Bond Multiplier No. 1 (= 1 dose)
• more than 60 g of colorant = prepare two separate mixes
3. Color the lightened sections. Leave in according to your technical expertise (30 minutes maximum). Rinse.   
4. Apply 15 ml of OLAPLEX Bond Perfector No. 2 and rub into hair section by section. 
5. Leave in for 10 minutes, then rinse. 
6. Shampoo hair with EQUIVITAL or YZAE Post-Color  Shampoo, then apply usual conditioner. 

Times
Application: 45 minutes
Processing time: approximately 1 hour

Ingredients 
ATTENTIVE
Softness and Hold Relaxing Lotion
BLUSH SATINE
OLAPLEX Bond Multiplier No. 1, adjust based on quantity of product used 
90 ml of warm water based on selected protocol
Essentiel KERATIN Tailor-Made Hair Repair Treatment

Recipe

STEP 1: PERM

1. Apply ATTENTIVE perm according to your usual protocol.  
2. Rinse out the reducing agent, towel-dry curlers and apply relaxing lotion. 
• For very damaged hair: Rinse out relaxing lotion after a processing time of 5 minutes, apply pure Bond Multiplier No. 1 to curlers, then leave on for 7 minutes 30 seconds. Next, repeat application of Bond Multiplier No. 1 and leave on for another 7 minutes 30 seconds, then rinse.
• For damaged, highlighted hair: Dilute 30 ml of Bond Multiplier No. 1 with 90 ml of warm water and immediately apply over relaxing lotion, leave on for 7 minutes and 30 seconds. Repeat above steps with the same level of dilution for OLAPLEX Bond Multiplier No. 1, leave on for another 7 minutes and 30 seconds, then rinse.
3. Towel-dry hair. 

STEP 2: HAIR COLORING

1. Apply desired shade of BLUSH SATINE to towel-dried hair. 
2. Leave in according to your technical expertise. (20 minutes maximum) 
Note: Processing time may be reduced when a developer is used.   
3. If necessary, apply ESSENTIEL KERATIN repairing treatment. Leave in for 10 minutes. Rinse.